Won Brothers 350 Watt Titanium Proheat Aquarium Heater With Remote Temperature Controller Review

We at ModestFish are always trying to give our readers the most accurate and upwardly to appointment information that nosotros can when it comes to aquarium care and equipment.

To that end, we decided to become really in depth and create a head-to-head comparison to find the best aquarium heater .

Virtually aquarists don't have the time, money or inclination to buy multiple heaters and figure out which one works the best. They just have to buy 1 and hope for the best.

Then, we did the footwork for yous so you take the best possible information before yous spend your hard earned cash.

Later a whole lot of enquiry, I bought the Fluval E200, Hygger, Fluval M200, Ehiem, and HITOP and carried out experiments in 1 of my own abode aquariums to run across which is the safest and about authentic to employ.

Here are my results:

Best Aquarium Heater Winner: Fluval E200

The Fluval E200 is the best aquarium heater and too the almost accurate and safety.

Out of the heaters I tested, it was the set up-information technology-and-forget-information technology model. I really like its congenital-in heater guard, making it a safe and reliable heater you can count on.

Also, I Beloved it has the digital display that lets you know whether information technology's in standby or heating mode and will even alert you if in that location is a serious temperature problem in the tank.

That could be the deviation between averting disaster and losing a tank full of fish.

If your tank is bigger or smaller than a 55 gallon, no problem! Fluval makes several different sizes of E heaters for y'all to cull from.

Fluval E200 Advanced Electronic Heater, 100-Watt Heater for Aquariums upwards to 65 Gal., A773

Final update on 2022-04-nineteen / Commissions Earned / Images from Amazon Production Advertising API

Best Aquarium Heaters Compared & Reviewed

I purchased the Fluval E200, Hygger, Fluval M200, Eheim, and HITOP aquarium heaters, tested them for accuracy, condom and every solar day utilise to meet which one is best.

Here are the results:

1. Fluval E200 Electronic Heater (Tiptop Pick)

Installing this heater was a cakewalk. The suction cups on this affair are amazingly strong. You can adjust the peak of the bracket that the suction cups adhere past simply squeezing the sides of the heater, simply below the digital display.

You do demand to be careful about placement. This heater is meant to accept the summit ½ inch (1.25 centimeters) of the heater out of the h2o. Just, the bully sliding subclass makes this easy to accomplish.

This heater is designed to exist attached to the back wall of your tank, but if you need to adhere it to a side wall, a bracket for side mounting is included.

But, you cannot install this heater in a horizontal position since this would submerge the entire trunk of the heater. The ruby switch at the peak is waterproof, simply not designed to stay submerged total time.

The E200 comes preset to 77°F (25°C), but it's simple to adjust the temp. There is a red lever at the acme of the heater, you simply toggle information technology left to decrease the temperature or right to increment it.

I really love the digital display on this heater. Non just does information technology brand information technology super like shooting fish in a barrel to set the temperature, only it also displays the current water temperature in real time. Besides, if the water temp goes five.5°F above or below the set temperature, the display will flash to help alert y'all to the problem.

The display as well functions equally an indicator low-cal. During normal standby mode, the LCD screen will be green. If the temp has dropped beneath the gear up temp, it will plough bluish to indicate that the heating element has turned on. If the temp becomes higher than what's set, the LCD will plough blood-red.

I've had trouble while running this test with some heaters being a bit underpowered, especially if they have a built in heater guard.

However, that is non the case with this E200. It easily holds the water at 75°F.

Scale was very simple. I set the heater to 75°F and that was it. It merely steadily kept the water nice and toasty, just the way I wanted information technology.

I was able to but set it and forget it. Then nice!

I love the built-in heater guard. You can really feel the quality of the dense plastic when y'all hold it in your hand.

I didn't accept to worry that my fish would accidentally touch the heating element at all.

I but take ii little things to complain about.

First, the heating tub underneath the heater baby-sit is made of drinking glass. This makes it vulnerable to not bad or shattering.

Be particularly careful when you take this heater out of the water. If the heating tube is hot, and it is suddenly taken out of the water, it could crack.

Also, this heater does not take a dry sensor. The instructions emphasize repeatedly that this heater should never be allowed to run out of the h2o.

If information technology is allowed to run outside of the water, unplug it and permit it cool for at least an hour. Putting the heater back into the h2o while information technology's super hot could cause the glass tube to shatter (this is true of any glass or ceramic heater).

Only honestly, all of the good points of this heater far outweigh any negatives. This is my top selection out of all the heaters I tried for this experiment. I highly recommend it.

Pros:

• Like shooting fish in a barrel to read digital brandish
• Sturdy, born heater guard
• Display flashes if tank is too hot/cold past v.5°F
• Unproblematic installation with powerful suction cups
• three-fashion indicator calorie-free that shows active heating mode, standby manner or overheat alert
• Set it and forget it scale

Cons:

• No dry sensor
• Internal heater tube is made of glass

Fluval E200 Avant-garde Electronic Heater, 100-Watt Heater for Aquariums up to 65 Gal., A773

Terminal update on 2022-04-19 / Commissions Earned / Images from Amazon Product Advertising API

Read Our Full In-depth Review For The Fluval E200 Hither

2. Hygger 200W Digital Quartz Aquarium Heater

This heater is a scrap different than the others on the list. Instead of just a unmarried, self-contained unit, this heater is made up of three parts:

• Heating unit of measurement
• Temperature probe
• Control unit of measurement

The heating unit looks just similar any other aquarium heater, although it is much smaller than most aquarium heaters. It comes with it's ain born heater baby-sit that volition protect fish from touching the actual heating element and called-for themselves.

The temperature probe sits at the terminate of a thick wire that you suction cup to the back of the tank. It's basically a temperature sensor that sends data to the control unit.

The command unit has a display that shows the electric current temperature of the tank. The temperature probe is hardwired into the control unit, but the heating unit actually plugs into it with the same kind of pronged plug you'd use with an electrical wall outlet.

The control unit of measurement turns ability on and off to the heating unit. Without the command unit, the heating element would just stay on continuously and overheat the tank. Never utilize the heating unit of measurement without the control unit!

I also had to knock off points for durability. Underneath the heater guard is a glass heater. The guard should help protect the drinking glass somewhat from accidental bumps, but the drinking glass is notwithstanding vulnerable to cracking from things like rapid temperature changes.

This heater does have an overheat sensor, but I notwithstanding gave it a ranking of only ane. The overheat sensor will non shut the heater down until the h2o temperature reaches 97°F (36°F). Any fish in the tank would be long dead before the h2o reached this temperature.

Also, the sensor doesn't seem to detect when the heater is running outside of the h2o since in that location are so many reports of this heater melting if it runs outside the tank.

Installing this heater takes a little more work because you take to mount all three parts. The temp probe and the heating unit are easy to suction loving cup to the inside of the tank.

But, mounting the control unit of measurement is a major pain. It'southward supposed to suction loving cup to the side of the tank but I've had nothing only bad luck with this.

The suction cup for the control module is the aforementioned as the ones that you use to adhere the heating unit inside the tank. The ones inside the tank work great, but it just is non stiff enough to hold up the surprisingly heavy control until

I take ii of these heaters and the suction cups for both command units merely will not stay put. They'll stick to the glass when you start set the heater upwardly, but afterward a few days, information technology will fall off and keep falling off.

I solved this in both cases by mounting a plastic thumb tack either on the wall behind the tank or on the side of the wooden tank stand up. Not the well-nigh elegant solution, but it'due south uncomplicated and you lot tin't see the thumb tack behind the control module.

Likewise, despite beingness rated every bit a 200 watt heater, the Hygger Quartz heater struggled to maintain a consistent temp in my 55 gallon (information technology does swell in my twoscore gallon). There's tons of water flow in this tank, and frankly, I've non had this consequence with other 200 watt heaters.

To get the tank to maintain at 75°F, I had to bump up the temp on the control unit to 77°F. I did accept to fiddle with it twice after installing to bump up the temp (I would give information technology iv hours so check back on the temp).

And information technology yet didn't e'er warm the tank to exactly 75°F, it was either a bit too warm or a flake too cool. And because you can only alter the temp setting by whole degrees, at that place'southward no fashion to tweak it farther.

So, I really like the pattern with the built in heater guard, but this model does accept some bug that knock it down in the ratings.

Pros:

• Takes upwards less room
• Built in heater guard
• Easy to ready temp
• Indicator light for both standby and active heating modes

Cons:

• Exterior suction cup not stiff enough
• Extremely difficult to calibrate
• Somewhat inconsistent temperature
• Overheat cutting off takes place at also loftier a temp
• No dry sensor

Auction

hygger 200W Aquarium Heater with LED Digital Temperature Controller, Submersible Fish Tank Heater for fifteen-thirty Gallon Tank

Last update on 2022-04-19 / Commissions Earned / Images from Amazon Product Advertising API

Full review for the Hygger 200W Digital Quartz Aquarium Heater

3. Fluval M200 Submersible Heater

I have a lot of experience with this detail heater. I've endemic several Fluval Yard heaters, of various sizes, over the years.

Installation is really easy, the mounting bracket with suction cups is already attached to the heater tube.

All you have to do is open the packet and stick the heater to the dorsum drinking glass, easy peasy.

I do have to knock it a footling scrap on immovability because it is a drinking glass heater, although as of now, I've never cracked one of these.

The drinking glass has a mirror finish that is supposed to let it blend in better and be less noticable. I can't really adjure to that, I tin totally withal run into that the heater is in the tank.

Of class, this is completely subjective, but I remember that the mirror finish and slim profile exercise lend the M200 a fancy, modern await that I really like.

Sadly, no congenital in heater guard for this model. However, since it'south so nice and slim, you can fit it with an aftermarket heater guard, if y'all would like.

This heater has a dainty, clear temperature dial on the meridian of the heater.

I had to fiddle with the calibration a little bit, but all information technology took were two tries and so I got it to hold the water at a steady 75°F.

This heater does take an indicator calorie-free, only only for agile heat mode, not standby.

All around, if you lot want a uncomplicated old-school style tube heater that gets the task done, yous can't go incorrect with this Fluval M200.

Pros:

• Slim, modern wait
• Piece of cake to read temperature dial
• Super easy installation

Cons:

• No heater guard
• Glass heater that could cleft
• No overheat or dry sensor

Fluval M200 Submersible Heater, 200-Watt Heater for Aquariums upwards to 65 Gal., A784

Concluding update on 2022-04-19 / Commissions Earned / Images from Amazon Product Advertizing API

Read our total in-depth review for the Fuval M200 Submersible Heater

4. Eheim Jager Aquarium Thermostat Heater

And so, my start impression of this heater was that information technology'south absolutely huge! I was very surprised to compare it to my 300 watt Marineland heater and find that this 200 watt heater is several inches longer.

The Eheim heater comes with a simple bracket that you adhere the included suction cups to and and then simply stick the heater on the side of the tank.

This is a fully submersible heater, so you don't have to exit any part of it out of the h2o. But, although installation was piece of cake, it made me a flake nervous. Even in a 55 gallon tank, it felt like the heater was nearly too large to exist installed in the same part of the tank where my heater normally goes in the tank.

The tube is also bigger than the standard heaters I've used over the years. I really don't recall that you could get whatever kind of standard heater baby-sit to fit over the glass tube.

I do like how large and like shooting fish in a barrel to read the temperature punch is, but getting this thermometer calibrated can exist tricky.

The temperature dial on this heater actually has two moving parts instead of 1. The blue dial sets the temperature level of the heater, the red punch lets y'all calibrate the heater so that the temp you lot fix the heater for matches the bodily temp the heater warms the h2o to.

Yeah, I know that's confusing at first glance.

It'south kind of hard to explicate, only I'll give it a go. Let's say that yous set the punch for 75°F, but the tank consistently sits at 78°F. Yous can actually plough the cherry-red indicator dial then that the pointer sits on the actual temp.

By making the red indicator dial friction match the bodily temp, the heater punch should then be accurate. And so, the h2o temp should match up with whatever temp you've assault the dial.

Getting this heater to warm the tank to the proper temp was adequately challenging. I prepare the temp to 75°F on the dial, but this turned out to exist 2°F likewise much. I turned the oestrus down a few notches, but and then it was likewise common cold. Then information technology was also warm over again, etc.. Finally, after messing with it for the fifth time, I finally got the temp to 75°F.

But, I tin say that once you get this heater gear up to the correct temp for your tank, it does a great job of holding the temp steady.

This heater does not have an overheat sensor. If it's in the h2o, there is no temp that volition cause it to exercise an emergency shut downwards.

But, information technology does have a dry sensor that will shut the heater off if it leaves the water and will plow the heater back on once it's returned to the water.

Pros:

• Indicator lite turns on when heater is running
• Big, easy to read temperature dial
• Consistently holds a steady temp
• Dry sensor

Cons:

• Large size could brand placement tricky
• Calibration tin can be frustrating
• Too large for virtually heater guards
• Glass construction may exist vulnerable to cracking
• No overheat sensor

Eheim 3619090 Jager Aquarium Thermostat Heater 300W

Last update on 2022-04-19 / Commissions Earned / Images from Amazon Production Advertising API

Read total review of Eheim Jager Aquarium Thermostat Heater

5. HITOP Adjustable PTC Aquarium Heater

I have to mention that installing this heater was pretty hard. You're supposed to adhere the suction cups to the heater guard by pressing a nub on the back of the cup through pre-drilled holes on the back of the baby-sit.

This is pretty standard, lots of devices that utilize suction cups are like this, even several others on this list. But, these were insanely difficult to button through.

Merely, the holes are a bit too modest, in my opinion, because it is really, really hard to go the nub on the back of the suction loving cup to become through.

After several failed attempts, I had to get my husband to try information technology. He's a big, strong, blue collar guy and even he had to utilize a lot of effort, cursing and a small screwdriver to get them to go through.

Definitely, if you have whatever kind of trouble using your hands, you will need to ask someone to assist you lot become this heater installed.

I do really like the heater guard on this model. Information technology protects the ceramic heating chemical element and should prevent most adult fish from e'er touching it.

Information technology also has an piece of cake to read control punch on the top with clearly marked temperatures.

Even so, I don't think the ceramic heating element has enough surface surface area to heat a 55 gallon tank. I had to proceed bumping up the rut using the dial.

I had to adjust the oestrus until the dial was attack 79°F to get the water temp to stay at 75°F.

I recall this heater would probably practice not bad in a xxx-xl gallon, only I think it struggles a bit on a 55.

Pros:

• Easy to read temperature punch
• Built in heater guard

Cons:

• Installation was ridiculously difficult
• Underpowered

No products found.

Read full review of HITOP Adjustable PTC Aquarium Heater

Which Aquarium Heater is All-time?

So, the Fluval E200 was the clear winner of this head-to-head comparison.

It's ridiculously easy to install, set and calibrate.

Of all the heaters that I tested, it was the set-information technology-and-forget-information technology model. I really like that it's got a congenital-in heater guard to assistance go along adult fish rubber.

Also, I LOVE that it has the digital display that lets you know whether it's in standby or heating fashion and will fifty-fifty alert you if there is a serious temperature problem in the tank.

That could be the difference between averting disaster and losing a tank full of fish.

If your tank is bigger or smaller than a 55 gallon, no trouble! Fluval makes several different sizes of E heaters for you lot to choose from.

I think this is going to be my "become to" heater from now on. It really is that absurd.

I wish you lot and your fish the very all-time!

Fluval E200 Advanced Electronic Heater, 100-Watt Heater for Aquariums upward to 65 Gal., A773

Last update on 2022-04-xix / Commissions Earned / Images from Amazon Product Advertising API

How I Tested the Aquarium Heaters

Each heater was placed in one of my 55 gallon (208 liter) tanks and immune to run for a week.

All five heaters are 200 watts, to make certain that I was making a fair comparing betwixt brands and models. I besides installed them in the aforementioned office of the aquarium to make sure that each heater was exposed to the same amount of h2o flow in the aquarium.

This tank is housed in a climate controlled room with an air temperature between 70°F and 72°F and the desired h2o temperature is 75°F (24°C).

Although I used 200 watt heaters on a 55 gallon tank, nigh of these heaters are available in smaller and larger wattages that would work for different tank sizes.

I specifically judged the heaters on the following criteria:

• Installation – how easy or difficult was information technology to install the heater in my tank? Were the suction cups loftier quality and strong enough to keep the heater in identify?
• Scale – how piece of cake or hard was it to become the heater set to a level that kept the water at 75°F (24°C)? Did I have to mess with the heater repeatedly to get the tank at the right temp or could I merely set up information technology and forget information technology?
• Consistency – was the heater able to maintain a steady 75°F (24°C) in the tank?
• Features – does the heater have these features and how well do they work?
  • Like shooting fish in a barrel to read temperature settings – can you hands tell what temperature y'all're setting the heater on?
  • Durability – heaters can take exteriors fabricated of glass, ceramic, plastic or titanium. Glass and ceramic are the most vulnerable to cracking or shattering.
  • Indicator low-cal – does the heater take indicator lights that let yous know it'south in standby versus agile heating mode? Does it simply take a light for active heating mode? Or does it have no indicator lights at all?
  • Overheat/dry sensor – does the heater have an automatic shutoff if the heater gets as well hot? Does it have a sensor that will close the heater down if information technology is running out of the water?
  • Heater guard – does the heater have a plastic guard that will keep fish from touching its surface?

These factors were graded on a scale of 1-5, with one being the worst and 5 being the all-time.

If a heater doesn't have a given feature, I gave them a nada for that category on the charts below. And so, it may look like some categories are missing, but information technology's just considering the feature wasn't there to grade.

And for indicator lights, heaters with ane indicator calorie-free got a 2.5 and those with 2 got a score of 5.

How to Choose an Aquarium Heater For Your Tank

Available Wattage vs. Tank Volume

It'south really important to choose the right size heater for your aquarium.

If a heater is too small, it will struggle to maintain the proper temperature, will have to run constantly and will most probable article of clothing out much quicker than normal.

If a heater is besides large, it may overheat the water or cause large temperature swings.

So, the heater that works for a thirty gallon (113 liter), won't work for a 55 gallon (208 liter).

Heaters come up in many different power levels, which are divers by wattage. The higher the wattage, the more powerful the heater is.

The usual bones formula that folks have used for a long time is 3-five watts per gallon (2-3 watts per liter).

To narrow down what size heater you lot need, you simply need to know the volume of your tank and how many degrees the heater volition need to raise the temperature of the water.

For example, if you had a 20 gallon tank, the room information technology'south in lxx°F (21°C) and you want the tank water warmed to 75°F (24°C), then a 60 watt heater should be simply right.

Just, if you wanted the tank at 75°F and the room temperature was consistently 60°F (16°C), yous would need a stronger heater to continue upward with that much of a temperature difference. So, a 100 watt heater would be more appropriate.

Consider using more than than one heater in the tank for aquariums 55 gallons (208 liters) and upwards and/or if the room is ten°F colder than your desired tank temperature. Besides, if one heater fails, you tin limp forth with the other heater temporarily until you can go a replacement. Much preferable to having no heater at all.

Adjustability

You want to be able to adjust the temperature settings on your heater. Sounds silly, I know, just some heaters come with a set up temperature. If you lot demand to modify the temperature for whatever reason, information technology becomes impossible.

Access to the Controls

Over again, sounds obvious, but if you lot don't make certain you lot're able to hands adjust your heater underwater, it can be a very frustrating process. You want to look for heaters with a large control knob which is easy to take hold of and twist when submerged.

Temperature Readability

The best heaters y'all can buy take numerical temperature gauges. You'll want to make sure y'all're hands able to view this number.

Retrieve, this number may not always be authentic, it's adept practise to take a thermometer as well.

Safety Features

Firstly, make certain the heater you're ownership is fully submergible, most of them are, merely it's best to make certain. Automatic shut off features are very good. These will automatically plow the heater off when the water level gets besides low, or the temperature of your tank gets also high.

A light indicator is the next safety feature I like to see. This means that the heater has a calorie-free when it's on and when information technology actually heating. You'll want to know if your heater is actually on or you'll have to constantly monitor it.

Do Yous Demand an Aquarium Heater?

Well, that depends.

Some species of fish don't need a heater and will be perfectly happy with room temperature water, like goldfish or white cloud mountain minnows.

This is also true of dwarf freshwater shrimp, like cherry or crystal shrimp.

Simply, most of the fish in the aquarium hobby come up from tropical regions that are much, much warmer than the average room temperature. They demand temps anywhere from 75°F (24°C) to 82°F (28°C).

They will die if they are kept in water that is too cold for them.

So, you absolutely need to add a heater to any tank with tropical fish.

Please, carefully enquiry any species of fish you program to keep. That way, you know what kind of temperature and water parameters they'll need to thrive in your tank

grimaldiablempoore.blogspot.com

Source: https://modestfish.com/best-aquarium-heaters/

Bagikan Artikel ini